Unclogging a drain is one of the most frequent reasons for calling in a plumber. Blocked drains can cause many minor issues, from unpleasant odours to water that won’t drain. Life can quickly devolve into a nightmare if these problems are allowed to worsen. There are some situations where calling a plumber might just be a waste of money and time. A blockage in the kitchen sink is usually due to leftovers and the solutions for these are very simple.
DIY Tricks for clearing Blocked Gutters and Drains
Now, you may be able to unclog your blocked drains on your own to obtain instant solutions. You’ll have everything running smoothly in no time if you follow the advice below.
1. Boiling water
Boiling water is one of the oldest tricks in the book when it comes to clearing blocked drains. Soap scum, grease, and other gunk built up in your pipes will be dislodged by hot water. Add half a cup of liquid detergent to a litre of boiling water for greater efficacy.
2. Vinegar and baking soda mixture
Pour a cup of baking soda down the drain to get things started. Let the vinegar sit for a few minutes before pouring it down the drain. The clog will be broken up and dislodged by baking soda and vinegar bubbling in the gutter. After about 10 minutes, flush the drain with hot water to remove the solution.

3. Lemon Juice and Baking Soda
Those who are sensitive to vinegar’s odour will appreciate this approach. To begin, use a litre of hot water to flush the drain. Add a half-cup of baking soda and a half-cup of lemon juice to the drain next. Afterwards, flush a litre of hot water through it for another 30 minutes.
4. Tartar Cream
Unclogging drains with cream of tartar is a little-known trick. To get things started, flush the drain with hot water. Afterwards, combine 1/4 cup of baking soda with one tablespoon of cream of tartar in a large bowl and mix it well. When finished with the solution, add 1 cup of hot water and flush the drain. After letting it sit for an hour, run more hot water through the pipe to flush it out.
5. Plunger
Using a plunger to clear blocked drains is one of the most common methods of doing so. To get a plunger, walk into a hardware store and purchase one.
Plungers are available in a variety of styles and functions. The most common types of plungers can be found here.
The purpose of a cup plunger is to unclog sinks.
When it comes to unclogging toilets, the flange or beehive Plunger is the best option. The Plunger is one of the best tools for dealing with toilet clogs. This squeegee-like Plunger is made of natural ABS plastics and rust-proof stainless steel. It can be used to clean the inside of your toilet.
6. Drain Snake
Using a drain snake to clear blocked drains if plunging doesn’t work is an option. An auger is a long, slender cable that you insert into a drain to remove clogs. You can use the drain snake to either dislodge the clog so it can be flushed away or to hook the clog so you can remove it from the pipe.
Ultimately, cleaning the clogged drain is not very difficult at the beginning stage. A variety of factors can cause blocked drains. Some are self-evident, but there are a few that you might overlook. Try using some home remedies here if you notice gurgling noises, slow draining, and foul odours. Unless these tips are an absolute failure, you don’t need to worry about calling a plumber. Although it is suggested that you must not force anything to obtain results.